Lock nuts requiring a keyway (inch)

Contact Now

Locking plates engage a keyway in a shaft or adapter sleeve and are attached to the side face of the nut by two bolts secured with locking wire. A locking plate consists of a plate, two hexagonal head bolts with drilled heads and lock wire to secure them.Position the locking plate in the keyway. Tighten the nut further, if required, to align the holes in the plate with the holes on the side face of the nut, making sure that the plate maintains its position in the keyway. Screw both bolts into the side face of the lock nut and tighten them.

 

We offer a wide range of Lock Nuts and Washers. Contact us with your enquiry or use the Product Table below to find detailed information on a nut and washer. Lock nuts requiring a keyway Lock nuts with integral locking Precision lock nuts Locking (lock) washers are found on the above pages.

 

skf AN 18 Lock nuts requiring a keyway (inch)

Adapter Mount 113000 lbs
65 lbs Two-Bolt Base

skf AN 17 Lock nuts requiring a keyway (inch)

50000 0.018 lb
No Plugs 1/16 in

skf AN 16 Lock nuts requiring a keyway (inch)

169.875 mm 4.763 mm
28.575 mm 102.794 mm

skf AN 15 Lock nuts requiring a keyway (inch)

0.02 KGS 63.5mm
Steel In Stock

skf N 44 Lock nuts requiring a keyway (inch)

0.5800 in 1.0000 in
Cone & Seal

skf N 00 Lock nuts requiring a keyway (inch)

19000 RPM C0
Uncoated ABEC 9/7 (

skf N 710 Lock nuts requiring a keyway (inch)

Adapter Sleeve 208
Two-Bolt Flange Round

skf N 038 Lock nuts requiring a keyway (inch)

1.7500 in 49900 lb
a complete line of s Steel

skf N 950 Lock nuts requiring a keyway (inch)

1-25/64 in 2-3/4 in
1-5/8 in 2-1/2 in

skf N 630 Lock nuts requiring a keyway (inch)

Non-Expansion Bearin PN-39T
Normal Duty 6.8750 to 7.6250 in

skf N 036 Lock nuts requiring a keyway (inch)

Uncoated 0.8348 in
Non-Flanged Cup No Hole

skf N 750 Lock nuts requiring a keyway (inch)

0.01 KGS Steel
5mm 625-skf
1/6