skf AN 28 Lock nuts requiring a keyway (inch)

seal type:Standard; series:22300; d:75 mm; lubrication hole type:Lubrication Groove &; closure type:Single Seal; B:55 mm; manufacturer catalog number:0615005000; outer ring type:Not Split; static load capacity:79600 lbs; finish/coating:Uncoated;

d:260 mm; operating temperature range:Maximum of +120; thrust bearing type:Single-Direction; outside diameter design:Straight; race type:Flat; series:51100; separable or banded:Separable; cage material:Steel Cage; D:320 mm; maximum rpm:rpm;

Limiting Speed Rating (r/min):4250; D:90mm; Seals or Shields:Two Rubber Seals; SKU:s6210-2rsr-fag; Clearance:Standard; Static Load Rating (kN):18.6; Availability:In Stock; B:20mm; Fatigue Load Rating (kN):1.59; Weight:0.48 KGS;

grade:Precision; race material:Steel; misalignment angle:14 °; thread direction:Right Hand; ball material:52100 Bearing Steel; rod end type:Female Threaded; head width:0.437 in; housing material:Carbon Steel - Corro; head diameter:1.125 in; lubrication type:With Lubrication Fit;

manufacturer upc number:662864717885; d:0.7500 in; mounting type:Two-Bolt Flange; series:200; housing material:Cast Iron; locking device:Set Screw; duty type:Intermediate Duty;

bore type:Round; lubrication type:Lubrication Fitting; bracket width:56 mm; horizontal bolt spacing:34 mm; hub diameter:68 mm; length through bore:34 mm; mounting type:Three-Bolt Bracket S; housing material:Cast Iron; series:UCFK200; bolt size:M8;

finish/coating:Uncoated; series:100; B:24 mm; closure type:Single Seal; radial static load capacity:50 kN; maximum rpm:19000 RPM; D:140 mm; contact angle:15 °; bearing material:Ceramic; precision rating:ABEC 9/7 (;

housing material:Cast Iron; housing construction:Solid Pillow Block; D:5-1/8 to 5-3 standards met:UL, AFBMA, AGMA, ASM; overall length:7 in; mounting:Two-Bolt Base; lubrication type:Cannot Be Relubricat; finish/coating:Uncoated; overall height:3-1/2 in; duty type:Standard Duty;

Specific static load factor K0:120 N/mm²; d:45 mm; B:30 mm; Coefficient of friction µ min.:0.08; Mass bushing:0.1 kg; Specific dynamic load factor K:40 N/mm²; D1:60 mm; r max.:2.5 mm; Tolerance shaft:f7 m/s; B1:2.5 mm;

bore type:Round; duty type:Normal Duty; base to bore centerline:1.6875 in; overall length:4.0000 in; radial dynamic load capacity:4410 lbf; replacement bearing:UC206-19MZ2; radial static load capacity:2540 lbf; bolt size:7/16-14; lubrication type:Lubrication Fitting; seal type:Contact with Slin

d:190 mm; B:28.829 mm; Mass adapter sleeve assembly:10.5 kg; Lock washer:W 38; d3 max.:240.64 mm; d1:177.8 mm; B4:32.537 mm; B1:133.375 mm; G:189.789 mm; Threads per inch:8;

overall length:5 in; iso grade:9001:2008 &; D:3 in; d:1-3/4 in; material specification:SAE 863, FC-2000-K30; standards met:RoHS, REACH, DRC Con; series:FCCS; material:Sintered Iron-Copper; harmonization code:732690;

expansion type:Non-Expansion Bearin; rod hole diameter:25/32 in; housing material:Plastic; slot width:0.2500 in; finish/coating:ZMaRC; overall height:4-1/8 in; overall length:4-5/16 in; slot spacing:3.5000 in; series:Marathon®; d:1.2500 in;

bore type:Straight; flanges:(2) Outer; D:500 mm; dynamic load capacity:1400000 N; precision rating:Not Rated; ring separation:Separable Outer Ring; fillet radius:4 mm; finish/coating:Uncoated; B:80 mm; d:280 mm;

expansion type:Non-Expansion Bearin; manufacturer product page:Click here; base to bore centerline:4.1250 in; mounting:Two-Bolt Base; radial static load capacity:11700 lbf; replacement bearing:UG312-39; D:10.625" to 11.8; overall length:13.7500 in; base width:4 in; duty type:Heavy Duty;